Cardboard and Plastic Waste Balers make the best Recycling Machinery Equipment

Scrap Metal Balers

Nowadays, there is a residual value of recyclable materials, such as cardboard, plastics, paper, polypropylene, metals and many more. So they can be removed from a businesses general waste stream and sorted for recycling.

This meant that less general waste is going to landfill. The first way of collecting these recyclable wastes was to give them each different containers.

For example, a bin specifically identified for Cardboard. It would have a sign saying, "Cardboard Only". This is not the greenest way to recycle cardboard or any other material. Transporting loose cardboard or plastic in this state means there must be many collection vehicles constantly on the road. These thousands of lorries transporting cardboard and plastics, produced lots of pollution and were required much more frequently than the preferred solution.


As a result of the changing world and technology, there has been an advent of the Waste Baler. This Recycling Machinery first started typically as a Vertical Baler. The Vertical Baler is basically a steel container, with a top door and a bottom door. The top door is for loading the Cardboard, Plastic or other Waste material into the Baler. The bottom door is for removing the finished bale. There is a Pressing-Plate which is forced down onto the Waste. The result of compacting the recyclable waste material in a Baler has created many benefits. Because the waste is very compact, in a tied stackable form or shape, it can be stored. The need for transportation will be greatly reduced.

So there will be much less pollution on the roads. The waste is being recycled efficiently, so less waste will go to landfill. Businesses will pay less landfill-tax. The removal of bales is usually free of charge and sometimes a business can even gain some revenue. The cost of having a Waste Baler is usually much cheaper than having bins emptied.

Scrap Metal Balers

                      Scrap Metal Balers (PCL control Y81Q-135B)


Hydraulic Metal Baler
Hydraulic metal balers are applicable in steel plants, recycling companies, ferrous&non-ferrous smelting industry to press metal scrap (steel, copper, aluminium, stainless steel, discarded automobiles) into acceptable furnace charges(shapes: Cuboid, cylinder or octagon), so as to reduce cost of transportation, and increase speed of furnace charging.

Features
1, Hydraulic drive for all machine types, manual valve control or PLC control.
2, Bale-discharging: "turn-out", "push-out", "forward-out" or manual discharging.
3, No footing bolts needed in installation; Diesel engine can be equipped for power.
4, Baling force 10 grades from 63 to 400 tons; Productivity from 4 to 40 tons per shift(8 hours )
5, Press box size, bale size & bale shape can be customized.

The Choices of Portable Crane in The Industry

Hydraulic Metal Baler

Among all types of cranes available in the industry, portable cranes is one of the essential part in many job sites. If we categorize portable cranes further more, there are few options of moveable crane in the industry.

For example, portable crane with a fixed stand-alone base is good when we want to move a heavy items from one place to other places. While davit crane that fits into fixed base is normally mounted on the truck or some type of moveable transport.

Besides that, there are many different sizes and specifications of cranes based on the purpose of using it. For instance, if you want a cranes that operate specifically to sop corrosion, you may want to have cranes with a galvanized coating on it or made with stainless steel.
Almost all the cranes have a "disconnect cable" for you to disconnect it from the crane when stay hooked on the load especially when you are working with submerged pumps. Due to the difficulties of reconnecting the cable without unplugging the pump, the connection system on cranes will allows you to submerse those submersible pumps.

Also, most of the cranes have either a hand or a power winch. If it is a hand winch model, it is normally a worm gear or a spur gear with an disk brake to adjust the load. In addition, the control disk brake is easy for us to lock or unlock the crane for safety lifting purpose to prevent injuries.

For high end crane, normally it is a power winch which include an electric motor and AC electric winch. But there are also several types of power winch based on your loading capacity of winch. Of course, each power winch will come with a pendant control and brake.

Basically, there are three options, which are 12 volt, pneumatic and hydraulic. An flexible adjustment is important for allowing the adjustment of reach as well as height combinations based on your sizes of loading. Portable cranes are able to swing 360 degree on a pin and sleeve bearing located in a base.

TENGZEBALER Change the way of baler

TENGZEBALER is located in jiangyin, one of the most developed cities of China. With convenient transportation, only one and a half hour journey to shanghai, near yangzi river of jiangyin's bridge, zhangjiagang wharf and Shanghai wharf.

  We are a professional waste disposal hydraulic machinery manufacturer. Which mainly engaged in metal & non-metal hydraulic baler, alligator type shear, scrap briquetting press, four-column hydraulic press, square sheet shears, cardboard balers, PET bottle balers, cylinder crusher, vertical and horizontal balers for both metal and non-metal materials. They are widely used for scrap steel(aluminum, copper) recovering and processing industries, ferrous and non-ferrous companies, PET recycling company, etc.
    We firmly believe that quality is life, so we pay great attention on product's quality. In addition, we not only have the world's leading production facilities& testing instruments, but also have got authority of ISO9001-2000, CE, SGS certification.
    In order to increase our competitive power in the international market, we have been continuously absorbing senior managers, scientific concepts in recent years. Today, we not only have good management company business model, but also have a group of professional and production technical staff.
    Our vision: to be leader company which can provide metal hydraulic balers, metal crocodile type shearing, briquetting press, etc. for various industries.
    Our mission: To provide advanced equipments with reasonable price to our customers. To increase our customers' s trust and satisfaction, we deliver the state-of-the-art products just in time with our hearty and friendly communication and service.

Why choose our company:
Our Sales Team Can give you a prompt and considerate response at an early time.
Among competitors, we are leading supplier with acceptable price and reliable quality and excellent after-sales service. So, earlier contact us, more benefit you will make!